Glue applicators cut from wood scrap.

Making Glue Applicators with Scrap Wood

This slideshow requires JavaScript.

Are you a woodworker? Are you (like me) too cheep to buy high-end glue brushes but also adverse to applying glue with your fingers like some sort of filthy macaroni artist toddler?  Well do I have just the project for you: glue applicators made out of wood scrap.

What you need is a piece of scrap 6″ long or longer in the direction of the grain. Don’t make your applicators by cross-cutting (cutting perpendicular to the grain), and don’t use MDF or plywood scrap either. These materials will be too brittle at the thickness we’ll be cutting to be useful.

I cut the applicator by clamping a block of wood to my band saw about 1/8″ away from and parallel to the blade then repeatedly running the scrap through until I have a handful of 1/8″ thick strips. I suppose you could do this on a table saw too, but cutting strips this thin between the blade and the fence of a table saw is asking for either trouble or injury.

Once you’ve cut all of your pieces vacuum, air spray, or wipe them clean so you don’t get saw dust in your glue when you go to use them.